14 November 2020
Issued on: 2020-11-14
Designer: Bee Design
Photographers: John Hare (Safe Lane Global Ltd) and Guy Margot (Demining Programme)
Perforation: 13½ x 13½
Printing Method: Offset lithography
Printer: Cartor Security Printers
Denominations: 32p, 49p, £1.10, £1.96
At the end of hostilities in 1982 British Forces made considerable efforts to locate and clear mines and booby traps. Unfortunately, the efforts were very costly. Three soldiers suffered serious injury within the first three weeks of clearance and two others were injured in 1983. Following this, the UK government decided to stop clearance and fence off all suspect areas until such time as technology and processes had evolved that would reduce risk. 151 areas were identified as hazardous, which initial work then reduced to 122. Argentina estimated that several thousand anti-personnel mines (AP) and anti-vehicle (AV) mines had been laid. From 1982 to 2009 some mines were destroyed in minefields by the UK military’s Joint Service Explosive Ordnance Disposal Detachment using remote controlled equipment.
Mine clearance was completed in October 2020. The clearance teams, with their Zimbabwean deminers, have destroyed over 10,000 AP mines and 1,700 AV mines along with 22 cluster bomb submunitions and over 370 booby traps and assorted items of unexploded ordnance (excluding small arms ammunition). This has resulted in the release of over 23,000,000m2 (2,338 hectares) of safe ground back to the community that had been prohibited from using many beaches and areas close to the capital, Stanley, and the main populated settlements.
In 1997 the United Kingdom, alongside 121 other nations, signed the Anti-Personnel Mine Ban Convention, also known as the Ottawa Convention, which prohibits the use, stockpiling, production and transfer of anti-personnel mines and commits signatories to removing such mines from territories over which they have jurisdiction or control. To that end the United Kingdom restarted clearance work in 2009 selecting SafeLane Global Ltd (previously known as BACTEC Ltd) to carry out the clearance work and Fenix Insight Ltd to provide the Demining Programme Office, responsible for monitoring the progress, quality, safety and environmental aspects of the work.
How do they do it?
The mines were laid in standard patterns using mine laying ‘strings’ to create irregularly spaced positions of 8 mines as a row. In most minefields three strings/rows were laid parallel to each other forming a ‘panel’; multiple panels form the minefield. The documents handed over in 1982 by Argentine troops record the detail within each minefield and have proved to be credible records of the layout of panels. Unfortunately, only about 70% of the minefields had such records. Using the records and any other information available a plan specific to that area was developed. Clearance ‘lanes’ were then cut into the minefield from the outer fence.
The deminers used a number of techniques depending upon the type of mine, the terrain and the expected layout of the minefield. The most effective and efficient clearance method in the Falkland Islands was for the mines to be dug out by a combination of machines preparing the ground and human deminers following up, finding and excavating the mines. Most of the mines are described as minimum metal mines and can only be located at a few centimetres’ depth by the most sophisticated detectors available. To achieve the minimum required clearance depth of 20cm a combination of metal detection and manual excavation methods were used.
Once rows were encountered, the mine patterns could be worked out and the mines found and destroyed. Where there was no record, a technical survey technique was used to find the panels. Clearing landmines is a slow and demanding process in normal circumstances, but in the Falkland Islands additional factors made the task even harder: the weather is often challenging with high winds, heavy rain, sleet and snow which, combined with thick, fibrous peat and heavy vegetation, make for waterlogged ground that can be extremely difficult to cut through. Mines near beaches represented a particular challenge with blown sand being deposited as sand dunes: in Yorke Bay some mines were recovered over 15m below the surface.